Fabrication of aligment structures (32 pcs, 3,2 tons each) and center cans (2 pcs 3,4 tons each) for Kaombo Project.

Client: Aker Subsea AS
Project date: 2015/2016
Category: Subsea

zleceniodawca: Bladt Industries ASDimensions:  40,8 x 27 x 15 m
Weight: 1140 tons

Energomontaz-Pólnoc Gdynia (EPG) has built an accommodation block for Maersk Drilling’s jack-up rig Maersk Guardian.
The 1,140-ton heavy accommodation module will accommodate around 140 employees working on the rig.

Link

contractual partner: National Oilwel Varco (APL)
destination: Martin Linge field

Energomontaż-Północ Gdynia accomplished construction of oil and gas loading elements – buoy and turret for Martin Linge field. Structures were delivered for Norwegian company APL which is a part of national Oilwell Varco group.  The diameter of elements is 15 m and the height is 18 m. Total weight is over 500 tones. Elements of STL system are similar to the devices of the earlier order from the same client which were delivered by EPG in February this year.

The Submerged Turret Loading (STL) system represents the state-of-art-technology within offshore loading. The STL technology offers a flexible and cost-effective solutions for oil loading tankers and Floating Storage and Offloading. The construction can be classified as first-class offshore structures.

Martin Linge is an oil and gas field located in the North Sea, at a water depth of 115 meters. The gross recoverable reserves are estimated at 190 million barrels of oil equivalent. The field was discovered in 1975 and development plan was approved in 2012. First oil is scheduled for 2018.

http://www.yourprojectnews.com/epg%3A+loading+stl+section+for+martin+linge+field_130926.html

http://www.ynfpublishers.com/2016/04/epg-construction-accomplished

Fabrication of Mid Line Clump Weight for Hebron Project for Exxon Mobile.

dimensions: 4,6 x 4,6 x 2,3 m
Total weight: 2 x 18,4 tons
contractual partner: National Oilwel Varco (APL)
destination: Hebron field, Canada

EPG accomplished fabrication of completely outfitted subsea structures for Gina Krog – Norwegian oil field located on the Norwegian sector of the North Sea.Read More

Energomontaż-Północ Gdynia (EPG) accomplished fabrication of the winch with 800 tons pulling force for FPSO Unit.

The construction was ordered by NOV APL. Winch weights 53 tons and has 800 tons pulling force. In Singapore it will be installed on the FPSO unit, which will ultimately extract, purify and overload the oil from Catcher field in the North Sea. Cathher field was discovered in August 2010. The field is estimated to hold 96 million barrels of oil equivalent.

Read More

Fabrication of world’s largest vacuum chamber. Designed for blade detachment tests in largest turbine engines.

dimensions: 5,5 x 12 m
Total weight: 177 tons
contractual partner: The Institute of Aviation
destination: Gas Turbine Center in the Institute of Aviation, Poland

Fabrication of turrets, components of Offshore Loading System for Exxon Mobile.

dimensions: 2,7 x 5,6 x 4,3 m
Total weight: 2 x 32 tons
contractual partner: National Oilwell Varco (APL)
destination: Hebron field, Canada

Giant j-lay tower produced in EPG’s Gdynia facilities for REEL was placed onboard the Jumbo Jubilee heavy lift vessel.

The j-lay tower for laying pipelines on the seabed weighs 902 tons and is 42 meters tall. It is destined for a PLSV (Pipe Lay Support Vessel).  A similar tower was made be EPG in 2013 for IMECA, a daughter company of REEL.

Read More

Energomontaż-Północ Gdynia is carrying out commissioning the structure of four pile anchors  which are designed for Hebron mining field in Newfoundland.

EPG will perform four structures with a diameter of 1.7 m and a length of 16 m, which will be used to anchor to the seabed construction of two turrets that have also been made in the EPG. Recently the similar structures EPG made for Greater Stella mining field.

Read More